oil and gas

Improve the circularity of your wastewater.

Lower your total cost of ownership sustainably.

It is possible to improve public support for the sector.

01

Social pressure to become greener

It’s hard to create a greener process due to high water consumption, the amount of energy that’s needed to discharge wastewater and the necessary injections of wastewater.

02

High total cost of ownership

The oil and gas industry uses many hazardous chemicals for wastewater treatment. Due to its complexity, water treatment has a high total cost of ownership.

03

Frequent underground wastewater injections

After the purification process, a large share of the wastewater is injected. A reduction in wastewater storage in empty gas reservoirs is necessary for cost efficiency and a lower environmental footprint.

You will achieve these results with FerSol®

Simplify the process

it is possible to use FerSol® for oxidation, coagulation and to remove oil. As a side effect it eliminates bacteria, fungi and viruses. Simplify the process and reduce the need for hazardous chemicals.

Reduce chemicals

FerSol® removes chloride, hydrocarbons, heavy metals and sulphur compounds from the wastewater, preventing discharge to surface water.

Reuse water

By removing substances such as cyanide, ammonia and COD, it becomes possible to reuse much of the residual water. Contribute to the circular water economy and reduce sludge transport.

Waterzuivering

Inject less water

Thanks to FerSol®, it becomes possible to reuse much of the wastewater, reducing the need to inject water. This will save you a lot of costs.

Use less energy

FerSol® purifies water efficiently and densifies the sludge. It replaces energy intensive and costly procedures, which use ozone and UV. Save energy and costs at all stages of the industrial process: from purification to discharge.

Set higher environmental standards

Improve your environmental footprint by reducing energy consumption and transport, reusing process water and replacing hazardous chemicals with FerSol®, an environmentally friendly chemical.

Test our product FerSol®

And discover how FerSol® changes your wastewater treatment into a green, efficient and circular process. No strings attached!

Find the solution for your wastewater and let us analyse it in the Ferr-Tech WaterLab. We will identify the contaminants in your wastewater, to determine how FerSol® -Ferrate(VI) in solution- improves your process.

This gives you valuable insights into how FerSol® makes your water purification process green, efficient and circular. Moreover, we would be happy to discuss other challenges in the field of water treatment. We dare you to challenge us!

1. Share wastewater sample

Give us a sample of your most polluted wastewater. We will treat the water with Ferrate(VI) and work towards a solution.

2. Receive proposal

Based on the analysis, we will create a proposal for a green, efficient and circular water process.

3. Simple execution

Finally, we will demonstrate how you can easily apply FerSol® in your current water treatment system.